do you have descriptions for set_tv96 etc?
Hi!
The Initial description and common logic you can see here
CHDK firmware usage/AllBest - CHDK Wiki"Ixus compatible" version of your script:
@title Shutter TEST
sleep 500
rem initiation
press "shoot_half"
release "shoot_half"
get_tv96 t
:set_shutter
print "Tv set to",t
wait_click
is_key k "set"
if k=1 then goto "k_set"
is_key k "down"
if k=1 then t=t-32
k=0
is_key k "up"
if k=1 then t=t+32
k=0
set_tv96_direct t
goto "set_shutter"
:k_set
shoot
end
The Basic comand set_tv96_direct is most universal for shutter speed operations. This command sets tv value in APEX standart:
APEX system - Wikipedia, the free encyclopedia. Not a float value but integer with 96 multiplier, i.e. tv*96
Correspondingly get_tv96 returns current value of tv*96
Analogously for aperture operations you can use basic commands "set_av96_direct" and "get_av96" (but Ixus hasn't iris mechanism). Use command "set_nd_filter" as alternative
Good luck trying to get them to explain ANY of the new uBASIC commands
Barney, if you don't know how to help the best variant is keep silent