Standard 4 gig SD card memory only partly seen by CHDK - General Discussion and Assistance - CHDK Forum
« previous next »
Pages: [1]   Go Down

Standard 4 gig SD card memory only partly seen by CHDK

  • 3 Replies
  • 4333 Views
*

Offline 74prof

  • **
  • 66
Standard 4 gig SD card memory only partly seen by CHDK
« on: 14 / November / 2012, 22:24:57 »
Advertisements
I have a 4 gig SD not sdhc Data Mine card that works in my Canon A540 (released 2006).  CHDK tells me that there is abt 1.2 gig available (the memory available prompt under misc).  The regular camera menu visible below the CHDK menu says I have 3.7 gig available.  Windows Explorer also finds 3.7 gig with CHDK loaded.

In camera it formats as 32.  I used Cardtricks to reformat as 16.  I can't figure out how to make two partitions with Cardtricks (32/16). If that would make any difference.

Is there a way I can use CHDK on my 4 gig card and have access to the full 3.7 gig?

Or might the CHDK 1.2 gig feedback be incorrect?


Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Standard 4 gig SD card memory only partly seen by CHDK
« Reply #1 on: 14 / November / 2012, 22:41:33 »
CHDK might be misreporting the memory size - the A540 is a very old port.   Feel free to ignore what CHDK says - your camera will use all the SD card space that it thinks is available to store pictures regardless of what CHDK reports.

Update :  just looked at my camera - there is no "memory available" prompt on the Miscellaneous Menu.  There is a "Show Memory Info" but that tells me how much computer memory is available inside the camera.  It has nothing to do with space available on the SD card.

How much space does the OSD tell you is available on your SD card ?  (you might have to edit the OSD settings to see that).

« Last Edit: 14 / November / 2012, 23:02:16 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline 74prof

  • **
  • 66
Re: Standard 4 gig SD card memory only partly seen by CHDK
« Reply #2 on: 15 / November / 2012, 19:24:36 »
I may be okay.  As I tried to say, the OSD for my 4 gig card shows 3.7 gig, while the chdk menu "show memory info" states 1083932 bits.   If as you suggest that is just programming space, then there is no disagreement.

So if the memory remains stable, I will have twice the normal storage for my A540.

Any number of camera stores have told me that the maximum standard sd card size is 2 gig.
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Standard 4 gig SD card memory only partly seen by CHDK
« Reply #3 on: 15 / November / 2012, 19:54:20 »
Quote from: 74prof on 15 / November / 2012, 19:24:36
I may be okay.  As I tried to say, the OSD for my 4 gig card shows 3.7 gig, while the chdk menu "show memory info" states 1083932 bits.   If as you suggest that is just programming space, then there is no disagreement.
I think you can safely assume that I am right about that one ...

Quote
So if the memory remains stable, I will have twice the normal storage for my A540.
The 1083932 bits mentioned above can be useful to CHDK but does not give you more picture storage space.

Quote
Any number of camera stores have told me that the maximum standard sd card size is 2 gig.
The A540 does not support SDHC  (as noted here : http://chdk.wikia.com/wiki/A540 )  but depending on the web site I look at,  there may actually be a  4G capacity limit of an SD card rather than a 2G limit ( http://www.diffen.com/difference/SD_Card_vs_SDHC ) ( http://www.ehow.com/about_6304445_flash-memory_-sd-vs_-sdhc.html ) ( http://www.buzzle.com/articles/sdhc-card-vs-sd-card.html )

So if CHDK and your camera are happy to report 4G from a 4G SD card then have fun with it !

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal