SX50 HS porting thread - page 14 - DryOS Development - CHDK Forum supplierdeeply

SX50 HS porting thread

  • 350 Replies
  • 152416 Views
*

Offline lapser

  • *****
  • 1093
Re: SX50 HS porting thread
« Reply #130 on: 28 / February / 2013, 18:14:54 »
Advertisements
@gestatin, never mind  :D

link posted by yukia is invalid,

@gestatin, never mind the never mind  :-[

I'll post compiled version later.
@lapser, could you test zebra?

I'll attach the compiled versions for you.

Zebra works fine for me without any patches. I think maybe the "random red pixels" he reported are the normal zebra indication?

I installed the new patch with trunk 2606, and it works for 100b and fixes the crash problem in high speed burst with dark frame AUTO.
EOS-M3_120f / SX50_100b / SX260_101a / G1X_100g / D20_100b
https://www.youtube.com/user/DrLapser/videos

*

Offline nafraf

  • *****
  • 1308
Re: SX50 HS porting thread
« Reply #131 on: 28 / February / 2013, 18:28:49 »
I'll attach the compiled versions for you.
OK, thanks.

Did you retain core/main.bin.dump as srsa_4c suggested? :)

Re: SX50 HS porting thread
« Reply #132 on: 28 / February / 2013, 18:42:32 »
Sorry guys, you're going to have to hold my hand through a firmware dump.  Not sure where to put the Universal Dumper on the card.  I just copied the Dumper script to a text file, renamed it Dump.  Inserted the card and navigated through the Script menu until I found the dump folder.  Executed, then go the following message:

*** STARTED ***
uBASIC:1 Unk Stmt
*** TERMINATED***
DUMP.TXT

What the correct way to copy a Script to the card?

Thanks!

Re: SX50 HS porting thread
« Reply #133 on: 28 / February / 2013, 18:54:51 »
Universal dumper is a Canon BASIC script - CHDK is not used.

Read more here :  http://chdk.wikia.com/wiki/Canon_Basic/Scripts/Dumper

Especially the part at the top that says "read this first"
Ported :   A1200    SD940   G10    Powershot N    G16


*

Offline srsa_4c

  • ******
  • 4451
Re: SX50 HS porting thread
« Reply #134 on: 28 / February / 2013, 18:55:09 »
What the correct way to copy a Script to the card?
This is a Canon Basic script, it has nothing to do with CHDK.
Details are on this page: http://chdk.wikia.com/wiki/Canon_Basic/Card_Setup#EOScard
Start the reading with the EOSCard section.
You'll need to
- mark the card as scriptable with EOSCard
- create script.req with the correct content
- copy the dumper script into extend.m
- start the camera in play mode and press SET
The card must not be locked!

If you don't succeed, don't worry, at least one main developer has that dump.

*

Offline lapser

  • *****
  • 1093
Re: SX50 HS porting thread
« Reply #135 on: 28 / February / 2013, 19:01:05 »
Did you retain core/main.bin.dump as srsa_4c suggested? :)
Oops! Are these the right files?
EOS-M3_120f / SX50_100b / SX260_101a / G1X_100g / D20_100b
https://www.youtube.com/user/DrLapser/videos

*

Offline lapser

  • *****
  • 1093
Re: SX50 HS porting thread
« Reply #136 on: 28 / February / 2013, 19:13:15 »
What the correct way to copy a Script to the card?
If you don't succeed, don't worry, at least one main developer has that dump.

I think he means, never mind the never mind the never mind, whatever that means?

I sent a PM to yukia10 asking him to repost the firmware dump.

CHDK script files are all located on the SD card in the folder:

CHDK/SCRIPTS/

ubasic scripts all end with ".bas"
lua scripts all end with ".lua"
EOS-M3_120f / SX50_100b / SX260_101a / G1X_100g / D20_100b
https://www.youtube.com/user/DrLapser/videos

*

Offline yukia10

  • *
  • 32
  • SX50_100c
Re: SX50 HS porting thread
« Reply #137 on: 01 / March / 2013, 08:13:19 »
I do not know an appropriate file share site well.
So I uploaded the file to the same site.

Firmware dump of SX50HS 1.00c is available here:
http://www.sendspace.com/file/gc174e


Re: SX50 HS porting thread
« Reply #138 on: 01 / March / 2013, 23:51:08 »
___________________________________-
« Last Edit: 02 / March / 2013, 01:30:38 by radioman193 »

Re: SX50 HS porting thread
« Reply #139 on: 02 / March / 2013, 00:41:26 »
It looks like a addressing issue with this build.....
@ralph :  all the funny punctuation and random colors in your posts looks very dramatic but they are not helping the CHDK developers at all.  Unemotional posts with specific detailed data on what you have tested would help a lot.  Otherwise,  it would be good if you would just disable CHDK and have fun with your new camera as it was delivered by Canon .. please!
 
Ported :   A1200    SD940   G10    Powershot N    G16

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal