IXUS 240/ELPH 320 HS Porting thread - page 19 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 ... 14 15 16 17 18 [19] 20 21 22 23 24 ... 32   Go Down

IXUS 240/ELPH 320 HS Porting thread

  • 312 Replies
  • 147469 Views
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: IXUS 240/ELPH 320 HS Porting thread
« Reply #180 on: 12 / January / 2014, 15:27:14 »
Advertisements
Quote from: fsg4u on 12 / January / 2014, 14:23:56
Quote from: srsa_4c on 12 / January / 2014, 14:14:12
Quote from: fsg4u on 12 / January / 2014, 13:51:16
I have a IXUS 240 HS 100c and the CHDK CHDK-Ixus240_PreAlphaTest-100c-1.3.3260.3.zip from H_H just doesn't boot.
Please make a firmware dump: http://chdk.wikia.com/wiki/Canon_Basic/Scripts/Dumper
H_H hasn't published neither the 100c dump, nor his source...
Hey,
Thx. It works now after reformatting the 2 GB SD Card. I used the version that he uploaded to this forum earlier.
Great!  Will you now help us out and dump the firmware using the link srsa_4c posted ?

Quote
Interval script doesn' work though. No pictures are being shot. The problem seems to be that the camera doesn't start in shoot mode but in play mode. When I hit the play button nothing happens.
Starting in play mode is normal in CHDK.  If a simple interval script does not work then the port is not very far along.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline fsg4u

  • *
  • 5
Re: IXUS 240/ELPH 320 HS Porting thread
« Reply #181 on: 13 / January / 2014, 09:36:12 »
Quote from: waterwingz on 12 / January / 2014, 15:27:14
Great!  Will you now help us out and dump the firmware using the link srsa_4c posted ?
Hm, I have never dumped a firmware before. What would the difference be to the posting that H_H has made? I could try.

Quote
Starting in play mode is normal in CHDK.  If a simple interval script does not work then the port is not very far along.
My IXUS 75 started in shoot mode in CHDK.
Not even the shoot.bas works on the 240. It starts and exects the lens but when trying to shot (or save) the pictures i freezes.

Logged
*

Offline reyalp

  • ******
  • 14128
Re: IXUS 240/ELPH 320 HS Porting thread
« Reply #182 on: 13 / January / 2014, 16:49:51 »
Quote from: fsg4u on 13 / January / 2014, 09:36:12
My IXUS 75 started in shoot mode in CHDK.
Cameras with a physical play / rec switch distinct from the power button start in the correct mode. This generally applies to older, digic II - digic III era cameras.

Most modern cameras have a play button and a power button. These generally start in play mode, unless you hold the power button for a bit longer than usual.

Looking at the picture on the wiki,  ixus 75 looks like it should be the newer style, but it's one of the earliest to use this layout. Does it start in record mode even if you power it on with the play button?
Quote
Not even the shoot.bas works on the 240. It starts and exects the lens but when trying to shot (or save) the pictures i freezes.
Are you switching to record mode before starting the script?
What shooting mode are you trying to use?
Do you have raw enabled?
Logged
Don't forget what the H stands for.
*

Offline fsg4u

  • *
  • 5
Re: IXUS 240/ELPH 320 HS Porting thread
« Reply #183 on: 14 / January / 2014, 05:24:49 »
Thank you for your help!
Quote from: reyalp on 13 / January / 2014, 16:49:51
Cameras with a physical play / rec switch distinct from the power button start in the correct mode. This generally applies to older, digic II - digic III era cameras.
The IXUS 75 has a hardware switch between record mode and play mode. So on that cam, I can decide in which mode I wish to start.
Quote
Are you switching to record mode before starting the script?
What shooting mode are you trying to use?
Do you have raw enabled?
The IXUS 240 HS no hardware switch to choose between record and play mode. Without CHDK it always starts in record mode. If I want to switch to play mode I hit the play button.
WITH CHDK it starts in play mode. If I hit the play button, it just turns off.
If I hit the shuttor button, it goes to record mode and makes a picture(you can hear the sound) but my guess it, that it can't save the picture to locked SD Card and that's the reason while the camera freezes.
I try to use the normal shooting mode and have normal JPG compression set with highest the highest detail setting.
Thank you for any ideas on this.
FSG
Logged
*

Offline afishindouban

  • *
  • 14
Re: IXUS 240/ELPH 320 HS Porting thread
« Reply #184 on: 16 / January / 2014, 14:24:27 »
HI..... can you have this 100d for me to test ?  firmware update mode or bootable mode ?
I really need my 240HS can work with CHDK, have been try to search many days....


[/quote]

I have recently done a "Blind Port" for ixus 240HS firmware 100d. Will post it Soon.

Also have found and fixed ??? some of the porting errors for ixus 240HS firmware 100c, 100d. 101a, & 102a. More details soon.

Attached File:- ArmU's + 240-100d-Dump vs 100c #1.png

Shows that either Wi-Fi ??? data overwrites CHDK or vice versa.

I now have another Ixus 240-100c (#6), that is brand new, and with a brand new SD card, which has
the same problem ???.

I have just dumped Ixus 240-100c (#6),  More details soon.

H_H
[/quote]
Logged
*

Offline Hardware_Hacker

  • ****
  • 322
Re: IXUS 240/ELPH 320 HS Porting thread
« Reply #185 on: 16 / January / 2014, 21:28:42 »
Quote from: afishindouban on 16 / January / 2014, 14:24:27
HI..... can you have this 100d for me to test ?  firmware update mode or bootable mode ?
I really need my 240HS can work with CHDK, have been try to search many days....



Current Porting Progress for the Ixus 240's, A Further UpDate.

I now have 100c, 101a, 102a [8 Cameras]

A 100d has turned up, a some days ago.

The front of the 240-1xxx mechanicaly and opticaly is very similar to Ixus 125
The rear touch screen of the 240-1xxx  is similar to Ixus 310
The Wi-Fi is similar to Ixus 140 but also has a number of differences.
The Movie Mode is only very basic and crashes the camera.

My Porting aproach was to build a custom version, with code taken  from the closest relative camera,
if there were any errors/problems.
 
An Example; The  Touch Screen Offset Error, is fixed by some of the Ixus 310 code.

Good [All Versions]:-
* Compiles, Boots, Runs, Problems,.
* Extra Modes in Mode Map, that work.

Bad [All Versions]:-
* Run Problems, Wi-Fi problems, Crashes.
* For Me the Fir2 dosen't compile.
* A Tempory hold on my porting of the Ixus 240's.
* Lots more testing is required

100d :-
* Behaves similar to the other versions.
* Fir2 not available to make SD card bootable. [ I used my Ixus 115 to do this step]

H_H Originaly Posted on 10/January/2014
Logged
*

Offline georgewrfisher

  • *
  • 1
Re: IXUS 240/ELPH 320 HS Porting thread
« Reply #186 on: 16 / January / 2014, 23:39:52 »
I have the ELPH 320 HS with firmware 101a and I wanted to post: thanks for the great work! I look forward to using CHDK on my camera. Let me know if there is anything I can do to help.
Logged
*

Offline afishindouban

  • *
  • 14
Re: IXUS 240/ELPH 320 HS Porting thread
« Reply #187 on: 16 / January / 2014, 23:51:03 »
again, I have my camera 240 HS ready for test 100d firmware, 24 hours, full time :d
Please please...... I do not want to buy a new camera, I really want to have CHDK running in it.
Logged
*

Offline nafraf

  • *****
  • 1308
Re: IXUS 240/ELPH 320 HS Porting thread
« Reply #188 on: 17 / January / 2014, 00:03:52 »
Quote from: georgewrfisher on 16 / January / 2014, 23:39:52
I have the ELPH 320 HS with firmware 101a and I wanted to post: thanks for the great work! I look forward to using CHDK on my camera. Let me know if there is anything I can do to help.
Could you test and report? http://chdk.wikia.com/wiki/Testing

@afishindouban, I'll send you a binary version for your camera, please test it and report.
Logged
*

Offline Hardware_Hacker

  • ****
  • 322
Re: IXUS 240/ELPH 320 HS Porting thread
« Reply #189 on: 17 / January / 2014, 03:08:39 »
Quote from: afishindouban on 16 / January / 2014, 23:51:03
again, I have my camera 240 HS ready for test 100d firmware, 24 hours, full time :d
Please please...... I do not want to buy a new camera, I really want to have CHDK running in it.

Hi all,

Attached is full - PreAlpha - but PART_TESTED version for:-

 Ixus240-100d-1.3314.0-full.PreAlpha.zip

You will need to make SD Card bootable, I used a Ixus 115 to
do this before putting Ixus240-100d-1.3314.0-full.PreAlpha onto the SD Card.

Edit #0 ...240-100c old version is here
 http://chdk.setepontos.com/index.php?action=dlattach;topic=9005.0;attach=9341

Edit #1 ...  240-100c .... Ixus240-100c-1.3314.0-full.PreAlpha.zip ... Boots but then crashes.

Edit #2 ....240-100d ... Ixus240-100c-1.3314.0-full.PreAlpha....Boots and runs.

Edit #3 This version, Provided by nafraf,  "...Try 101a for IXUS240 HS 100d".
http://chdk.setepontos.com/index.php?topic=11112.msg109164#msg109164
240-100d ... Boots as a "240-101a" and runs Ok, CHDK, misc, Version reports as a "240-101a".

Edit #4 ... \platform\ixus240_elph320hs\sub\100d\bin_compat.h was changed to "GM1.00D" ???

This is a TEST version only;
see http://chdk.setepontos.com/index.php?topic=9005.msg109144#msg109144

H_H

Continued #190
« Last Edit: 17 / January / 2014, 22:14:29 by Hardware_Hacker »
Logged
Pages: 1 ... 14 15 16 17 18 [19] 20 21 22 23 24 ... 32   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal