IXUS110IS / SD960IS porting

hcosta

6

Re: IXUS110IS / SD960IS porting

« Reply #20 on: 12 / January / 2013, 18:00:07 »

Advertisements

Quote from: srsa_4c on 12 / January / 2013, 15:33:48

Quote from: hcosta on 12 / January / 2013, 11:09:55
Here it is my 1.01F firmware dump.
Thanks, I'll come up with a test version in a few days.

Thank you.

Logged

fe50

3139
IXUS50 & 860, SX10 Star WARs-Star RAWs

Re: IXUS110IS / SD960IS porting

« Reply #21 on: 13 / January / 2013, 07:08:32 »

Quote from: fe50 on 13 / January / 2013, 07:07:54

Added the
IXUS 110 / SD960 1.01F
full 8MB dump (dumped with cBasic udumper) by hcosta from this forum post to the CHDK P&S FW dumps repository.

Logged

-->FIRMWARE DUMPS<-- * Manual * Lua * me

srsa_4c

4451

Re: IXUS110IS / SD960IS porting

« Reply #22 on: 13 / January / 2013, 18:37:30 »

First test version for firmware 1.01f
Since I can't test this myself, please report whether it works, and any issues that you find.
You have to use the bootable SD card method.
Please note that
- you can enter/leave ALT mode by a short press on the play [>] button
- you have to press the play button longer for its original function
- you must leave ALT mode to be able to switch the camera off with the on/off button

update
This build is also compatible with the 1.01g firmware version. If you'd like to get current CHDK builds for 1.01f, 1.01g, please test this version and report your results in this thread.

update2: attachment no longer necessary, removed
~~ixus110_sd960-101f-1.1.0-full.7z (456.91 kB - downloaded 16 times.)~~

« Last Edit: 14 / February / 2013, 18:26:02 by srsa_4c »

Logged

hcosta

6

Re: IXUS110IS / SD960IS porting

« Reply #23 on: 14 / January / 2013, 12:14:30 »

Just load it and it works. It loads CHDK. Nice!

I will be testing it later and report back.

Thank you!

Logged

srsa_4c

4451

Re: IXUS110IS / SD960IS porting

« Reply #24 on: 19 / January / 2013, 11:38:40 »

@hcosta
Looking forward to seeing your report.

Quote from: srsa_4c on 16 / December / 2012, 21:31:12

Unusual behaviour:
Due to the small number of buttons I have remapped the On/Off button in ALT mode to act like the "DISP" button. You'll need to exit ALT mode to switch off the camera with it.

The above statement continues to be true for CHDK 1.1 releases.
From CHDK 1.2 on it's optional (and is OFF by default), see the attached screenshot.

ixus110_1.gif (8.9 kB, 480x270 - viewed 94 times.)

Logged

srsa_4c

4451

Re: IXUS110IS / SD960IS porting

« Reply #25 on: 22 / January / 2013, 19:40:35 »

I have checked in the 1.01f port: changeset 2510, changeset 2511. Autobuild won't be enabled until somebody confirms that the port actually works.

I've also enabled forced exmem allocation (I have forgotten about this). If it's crashing, please report it (it should be more stable though).
I'm not entirely comfortable with exmem, sometimes I get crashes in connection with PTP. I haven't been able to prove any exmem corruption in my tests, so it may not be related.

Logged