IXUS110IS / SD960IS porting

  • 51 Replies
  • 5761 Views
Re: IXUS110IS / SD960IS porting
« Reply #20 on: 12 / January / 2013, 18:00:07 »
Advertisements
Here it is my 1.01F firmware dump.
Thanks, I'll come up with a test version in a few days.

Thank you.  :)

*

Offline fe50

  • ******
  • 3038
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: IXUS110IS / SD960IS porting
« Reply #21 on: 13 / January / 2013, 07:08:32 »
Added the
  • IXUS 110 / SD960 1.01F
full 8MB dump (dumped with cBasic udumper) by hcosta from this forum post to the CHDK P&S FW dumps repository.

*

Offline srsa_4c

  • ******
  • 3171
Re: IXUS110IS / SD960IS porting
« Reply #22 on: 13 / January / 2013, 18:37:30 »
First test version for firmware 1.01f
Since I can't test this myself, please report whether it works, and any issues that you find.
You have to use the bootable SD card method.
Please note that
- you can enter/leave ALT mode by a short press on the play [>] button
- you have to press the play button longer for its original function
- you must leave ALT mode to be able to switch the camera off with the on/off button

update
This build is also compatible with the 1.01g firmware version. If you'd like to get current CHDK builds for 1.01f, 1.01g, please test this version and report your results in this thread.
update2: attachment no longer necessary, removed
ixus110_sd960-101f-1.1.0-full.7z (456.91 kB - downloaded 16 times.)
« Last Edit: 14 / February / 2013, 18:26:02 by srsa_4c »

Re: IXUS110IS / SD960IS porting
« Reply #23 on: 14 / January / 2013, 12:14:30 »

Just load it and it works. It loads CHDK. Nice!  :)
I will be testing it later and report back.

Thank you!


*

Offline srsa_4c

  • ******
  • 3171
Re: IXUS110IS / SD960IS porting
« Reply #24 on: 19 / January / 2013, 11:38:40 »
@hcosta
Looking forward to seeing your report.

Unusual behaviour:
Due to the small number of buttons I have remapped the On/Off button in ALT mode to act like the "DISP" button. You'll need to exit ALT mode to switch off the camera with it.
The above statement continues to be true for CHDK 1.1 releases.
From CHDK 1.2 on it's optional (and is OFF by default), see the attached screenshot.

*

Offline srsa_4c

  • ******
  • 3171
Re: IXUS110IS / SD960IS porting
« Reply #25 on: 22 / January / 2013, 19:40:35 »
I have checked in the 1.01f port: changeset 2510, changeset 2511. Autobuild won't be enabled until somebody confirms that the port actually works.

I've also enabled forced exmem allocation (I have forgotten about this). If it's crashing, please report it (it should be more stable though).
I'm not entirely comfortable with exmem, sometimes I get crashes in connection with PTP. I haven't been able to prove any exmem corruption in my tests, so it may not be related.

Re: IXUS110IS / SD960IS porting
« Reply #26 on: 26 / January / 2013, 08:20:10 »
Hi,

I've got this camera but with a firmware version of 1.01G and would love CHDK for it.

I'll provide a firmware dump soon.

Re: IXUS110IS / SD960IS porting
« Reply #27 on: 26 / January / 2013, 09:20:31 »
Here's the link to the firmware dump - 1.01G

https://dl.dropbox.com/u/14641356/ixus110is-1.01G.zip


*

Offline srsa_4c

  • ******
  • 3171
Re: IXUS110IS / SD960IS porting
« Reply #28 on: 26 / January / 2013, 09:31:51 »
Here's the link to the firmware dump - 1.01G
Thanks, please try the 1.01f test build above. The differences between 1.01f and g seem minor.
And of course report back what works and what doesn't.

Re: IXUS110IS / SD960IS porting
« Reply #29 on: 26 / January / 2013, 11:35:34 »
Given 1.01F version a go.

There doesn't seem to be the firmware update option required to load CHDK.

 

Related Topics