S110 Porting thread - page 9 - DryOS Development - CHDK Forum  
« previous next »
Pages: 1 ... 4 5 6 7 8 [9] 10 11   Go Down

S110 Porting thread

  • 105 Replies
  • 54919 Views
*

Offline Mlapse

  • *****
  • 554
  • S95 S110
Re: S110 Porting thread
« Reply #80 on: 28 / August / 2019, 13:11:36 »
Advertisements
Quote from: reyalp on 28 / August / 2019, 12:24:36
I think if you and c_joerg have used this port extensively without problems, we can take the alpha/beta labels off.

Haven't used it extensively, did not check video. But all the basics seem to function.
What I found was that CHDK has a superfine setting that I thought was only there if the cam did not support it, but that is a non issue.
Logged
frustration is a key ingredient in progress
*

Offline c_joerg

  • *****
  • 1241
Re: S110 Porting thread
« Reply #81 on: 28 / August / 2019, 13:42:19 »
Quote from: Mlapse on 28 / August / 2019, 07:19:44
although it is recognised by stick as 102B and sits in the right serial range (4 at position 6) to update
That’s interesting. I have a 8 at position 6 and I’m really sure I made the update…
Looks like that the hardware is a little bit different.

Quote from: reyalp on 28 / August / 2019, 12:24:36
I think if you and c_joerg have used this port extensively without problems, we can take the alpha/beta labels off.
I use the S110 very often, but only a part of the functions. I would take alpha/beta labels off.


Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
*

Offline reyalp

  • ******
  • 13958
Re: S110 Porting thread
« Reply #82 on: 31 / August / 2019, 19:04:46 »
Quote from: c_joerg on 28 / August / 2019, 13:42:19
I use the S110 very often, but only a part of the functions. I would take alpha/beta labels off.
Thanks. Removed. Can you check what free memory is on this camera? misc->show memory info, free memory value.
Logged
Don't forget what the H stands for.
*

Offline Mlapse

  • *****
  • 554
  • S95 S110
Re: S110 Porting thread
« Reply #83 on: 01 / September / 2019, 02:09:20 »
free memory 1407840
Logged
frustration is a key ingredient in progress
*

Offline c_joerg

  • *****
  • 1241
Re: S110 Porting thread
« Reply #84 on: 01 / September / 2019, 12:44:03 »
Quote from: reyalp on 31 / August / 2019, 19:04:46
Quote from: c_joerg on 28 / August / 2019, 13:42:19
I use the S110 very often, but only a part of the functions. I would take alpha/beta labels off.
Can you check what free memory is on this camera? misc->show memory info, free memory value.
1131720 Bytes / CHDK 144072 Bytes => 103a
CHDK Revision 5249

Quote from: Mlapse on 01 / September / 2019, 02:09:20
free memory 1407840
Which CHDK Revision do you use?
« Last Edit: 01 / September / 2019, 12:48:59 by c_joerg »
Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
*

Offline Mlapse

  • *****
  • 554
  • S95 S110
Re: S110 Porting thread
« Reply #85 on: 01 / September / 2019, 12:55:57 »
5256
Logged
frustration is a key ingredient in progress
*

Offline reyalp

  • ******
  • 13958
Re: S110 Porting thread
« Reply #86 on: 01 / September / 2019, 13:38:58 »
Free memory can depending on settings what was done between booting and checking the screen, so I don't think the difference between your results is unusual.

I wanted to know the free memory because the port notes.txt mentioned exmem wasn't implemented.  ~1 MB is plenty by CHDK standards, so this port is fine without.
Logged
Don't forget what the H stands for.
*

Offline Mlapse

  • *****
  • 554
  • S95 S110
Re: S110 Porting thread
« Reply #87 on: 12 / September / 2019, 15:19:34 »
I came across some odd behaviour that has to do with large and thus slow fat32 cards.
it does not create a fault in working as far as I can tell, but I thought I mention it anyway.

when a large (256GB) card is used in card lock method i have to press the on/off button for at least 3 seconds to make the lens come out instead of ending up in play mode, while normally that takes <1 sec with this model.
also it takes some 5 seconds before the camera responds with a blinking led to the pressing of the on/off button and starts up.
and then the chdk splash screen is blank white and only gets red just before it dissapears.
Logged
frustration is a key ingredient in progress
*

Offline Mlapse

  • *****
  • 554
  • S95 S110
Re: S110 Porting thread
« Reply #88 on: 23 / November / 2019, 08:48:21 »
I have found something that is a loss that it's not working.
Normally when I use a script with zoom@infinity set you will see AFL on the screen when the script runs, according to the S110 manual that function should activate AFL somewhere on the screen.
with the S110/100B I have AFL does not appear on screen and it keeps focussing at each shot. (square turns green just before shot)
@c_joerg do you also have this not working AFL-lock on your version?
« Last Edit: 23 / November / 2019, 08:59:03 by Mlapse »
Logged
frustration is a key ingredient in progress
*

Offline c_joerg

  • *****
  • 1241
Re: S110 Porting thread
« Reply #89 on: 24 / November / 2019, 07:16:54 »
Quote from: Mlapse on 23 / November / 2019, 08:48:21
@c_joerg do you also have this not working AFL-lock on your version?
I am on a trip and have no access to my S110 right now.
But I never notice the AFL-lock.
But I can't check wenn er have access again.
Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
Pages: 1 ... 4 5 6 7 8 [9] 10 11   Go Up
« previous next »
 

Related Topics