"Extra Photo Operations" turns my camera off!? - General Help and Assistance on using CHDK stable releases - CHDK Forum supplierdeeply

"Extra Photo Operations" turns my camera off!?

  • 7 Replies
  • 6055 Views
"Extra Photo Operations" turns my camera off!?
« on: 23 / January / 2013, 01:55:38 »
Advertisements
I have an S5IS and just installed chdk.  Everything seems to work except for the "Extra Photo Operations" item.  As soon as I press either "set" or the right arrow my camera just turns off.  I tried updating the camera firmware, but that didn't seem to do the trick. 

Has this happened to anyone else? Any help would be appreciated.

adam

Re: "Extra Photo Operations" turns my camera off!?
« Reply #1 on: 23 / January / 2013, 10:42:30 »
Forgive me if I'm wrong, but is your CHDK optimised for your camera firmware? I'm going to assume it is, but it's definitely worth a check.

Re: "Extra Photo Operations" turns my camera off!?
« Reply #2 on: 23 / January / 2013, 14:31:56 »
Hmm, forgive me if it is a silly question, but how do I check for the correct firmware?  I used STICK for the installation and I believe it did all that.  If you are referring the vers.req file, yes that was done.  But if there is a way to find out if the correct version was installed I would very much like to know how.  Thanks for the reply.

~adam

*

Offline srsa_4c

  • ******
  • 4451
Re: "Extra Photo Operations" turns my camera off!?
« Reply #3 on: 23 / January / 2013, 16:02:13 »
I have an S5IS and just installed chdk.  Everything seems to work except for the "Extra Photo Operations" item.  As soon as I press either "set" or the right arrow my camera just turns off.
Is this in play or record mode?
Quote
I tried updating the camera firmware, but that didn't seem to do the trick.
That's not a real firmware update (there isn't one for the S5), just another method to start CHDK.
Quote
Has this happened to anyone else? Any help would be appreciated.
Yes:
http://chdk.setepontos.com/index.php?topic=8331.0
http://chdk.setepontos.com/index.php?topic=8292.0
Unfortunately we still don't know anything, as both people reporting have "disappeared".

You can find out the firmware version by starting the cam in play mode, pressing & holding SET and then pressing DISP: http://chdk.wikia.com/wiki/Ver.req#Q._How_can_I_get_the_original_firmware_version_number_of_my_camera.3F

If you can get a romlog, that could help.


*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: "Extra Photo Operations" turns my camera off!?
« Reply #4 on: 01 / February / 2013, 17:36:06 »
srsa_4c found a similar problem with some of his older cameras.
I've modified the same code for the S5IS and attached are test versions for the two firmware versions of the S5IS.

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: "Extra Photo Operations" turns my camera off!?
« Reply #5 on: 05 / April / 2013, 19:05:15 »
srsa_4c found a similar problem with some of his older cameras.
I've modified the same code for the S5IS and attached are test versions for the two firmware versions of the S5IS.

Phil.


If anyone has downloaded and tested these versions please post some comments as to whether the issue is fixed.

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

Re: "Extra Photo Operations" turns my camera off!?
« Reply #6 on: 10 / May / 2013, 11:55:56 »
Hi Phil,

I updated to the latest version yesterday and after that I had the same problem with the "Extra Photo Operations". But your version corrected the problem.
Nevertheless, I noticed that  the "Curves" option disappeared.

Thanks

*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: "Extra Photo Operations" turns my camera off!?
« Reply #7 on: 10 / May / 2013, 17:42:10 »
Hi Phil,

I updated to the latest version yesterday and after that I had the same problem with the "Extra Photo Operations". But your version corrected the problem.
Nevertheless, I noticed that  the "Curves" option disappeared.

Thanks

Thanks for the update - I'll add the fix to SVN.

The version I posted is the development (1.2) version - the curves menu has been moved to the 'Extra Operations' menu.

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)


 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal