Few Queries for downloading chdk for sx40 using cardtricks util vers. 1.44? - page 2 - General Help and Assistance on using CHDK stable releases - CHDK Forum supplierdeeply

Few Queries for downloading chdk for sx40 using cardtricks util vers. 1.44?

  • 17 Replies
  • 3936 Views
*

Offline reyalp

  • ******
  • 12742
Advertisements
Please advise what can be done to correct this problem? should i try the installation of another firmware vers. for the sx40? or could this be harmful ?
If you see the CHDK splash screen, then you are using the correct version.
Don't forget what the H stands for.

weaterwingsz tried to download chdk into canon sx40 but could not.wDownloading build information from http://mighty-hoernsche.de/
Downloading build information from http://mighty-hoernsche.de/trunk/
Downloading build information from http://autobuild.akalab.de/CHDK-DE_full.txt
Downloading build information from http://autobuild.akalab.de/CHDK_DE_full.txt
Downloading build information from http://stereo.jpn.org/eng/sdm/download.htm
tables loaded successfully
IMG_2946.JPG dropped
C:\Users\basic\Pictures\+Acid photo\IMG_2946.JPG is being processed
Downloading http://zenoshrdlu.com/acid/acidchdk.properties
Stable CHDK - searching for build for sx40hs-100i
Stable CHDK - build found - bins/sx40hs-100i-1.1.0-2511-full.zip
Stable CHDK - build found - bins/sx40hs-100i-1.1.0-2511.zip
Downloading http://zenoshrdlu.com/acid/acidchdkt.properties
Trunk CHDK - searching for build for sx40hs-100i
Trunk CHDK - build found - bins/sx40hs-100i-1.2.0-2519-full.zip
Trunk CHDK - build found - bins/sx40hs-100i-1.2.0-2519.zip
Downloading http://zenoshrdlu.com/acid/acidchdes.properties
Stabiles CHDK-DE - searching for build for sx40hs-100i
Stabiles CHDK-DE - build found - CHDK-DE_sx40hs-100i-1.1.0-full_rev_2511.zip
Stabiles CHDK-DE - build found - CHDK-DE_sx40hs-100i-1.1.0_rev_2511.zip
Downloading http://zenoshrdlu.com/acid/acidchdet.properties
Experimentelles CHDK_DE - searching for build for sx40hs-100i
Experimentelles CHDK_DE - build found - CHDK_DE_sx40hs-100i-1.2.0-full_rev_2519.zip
Experimentelles CHDK_DE - build found - CHDK_DE_sx40hs-100i-1.2.0_rev_2519.zip
Downloading http://zenoshrdlu.com/acid/acidsdm.properties
SDM - no build found for Canon PowerShot SX40 HS 100i
Processing completed
bins/sx40hs-100i-1.1.0-2511-full.zip zip file being downloaded, please wait...
bins/sx40hs-100i-1.2.0-2519-full.zip zip file being downloaded, please wait...
CHDK-DE_sx40hs-100i-1.1.0-full_rev_2511.zip zip file being downloaded, please wait...
CHDK_DE_sx40hs-100i-1.2.0-full_rev_2519.zip zip file being downloaded, please wait...

waterwingsz, as per the acid download it found several programs for chdk for sx40,but i could not download any of them. All downloads failed. what is my next step?  Thanks!!

Go here :  http://mighty-hoernsche.de/  and download the build for the sx40hs fw 1.00i directly.

Ported :   A1200    SD940   G10    Powershot N    G16


waterwingsz, this is the same site  and firmware vers # that i had downloaded for the cardtricks method  and the booting method  and i had problems with the shortcut control on both.  Back to square one here.!!   I"ll try it again and see what happens.(from hoerche site)  Why wouldn"t the acid method work and download the needed files?  Thanks!! on doing my research acid has worked for others?

*

Offline reyalp

  • ******
  • 12742
waterwingsz, this is the same site  and firmware vers # that i had downloaded for the cardtricks method  and the booting method  and i had problems with the shortcut control on both.  Back to square one here.!!
As I already told you, if you see the CHDK splash screen, you have the right build for your camera firmware version.

Re-formatting your card and re-installing might help. Downloading the same file by a different method definitely will not.
Don't forget what the H stands for.

Re: Few Queries for downloading chdk for sx40 using cardtricks util vers. 1.44?
« Reply #16 on: 01 / February / 2013, 09:26:58 »
waterwingz  and rayalp i finally downloaded the chdk program via the acid method  via the trunk download and it seemed to work ok. still  alittle slow when i hit the alt-shortcut key,but it works.   Can one suggest a good tutorial on how to use all the settings  in the chdk menu in detail. On you tube their are a few but they only go over the basics  and not the entire menu.  Thanks  for your help!!

Ported :   A1200    SD940   G10    Powershot N    G16


 

Related Topics