A710 IS zoom during video recording - bugreport - AllBest's Builds - CHDK Forum
« previous next »
Pages: [1]   Go Down

A710 IS zoom during video recording - bugreport

  • 7 Replies
  • 7714 Views
*

Offline PG

  • *
  • 2
A710 IS zoom during video recording - bugreport
« on: 04 / April / 2008, 04:30:56 »
Advertisements
When I use the new optical zoom feature, it works flawlessly, unless I opt for digital zoom - when this kind of zoom is used, the optical one no longer works and the lens stays at its max (6x).
Using build 49.

Update:
Oh, sorry, I just found this bug was already reported.
« Last Edit: 04 / April / 2008, 04:37:55 by PG »
Logged
*

Offline ewavr

  • ****
  • 1057
  • A710IS
Re: A710 IS zoom during video recording - bugreport
« Reply #1 on: 05 / July / 2008, 12:06:48 »
Now this bug fixed for A710 in my private build  :D

I have question for Digic3 cameras users:
propertycase #91 : digital zoom enabled(0=off, >0 =on)
propertycase #95 : digital zoom value(0=minimal, 1,2...etc)

I found these values using IDA. Is this correct?

For Digic2 cameras this propertycases is #58 and #57, respectively.
« Last Edit: 05 / July / 2008, 12:08:38 by ewavr »
Logged
*

Offline cyril42e

  • ***
  • 111
  • SD1000/Ixus70 1.02a
    • CR-TEKnologies
Re: A710 IS zoom during video recording - bugreport
« Reply #2 on: 05 / July / 2008, 20:22:32 »
Quote from: ewavr on 05 / July / 2008, 12:06:48
Now this bug fixed for A710 in my private build  :D
You are fantastic ewavr! I did try to fix that, but without any success of course.
Where can your private build be found, to see if I can port it to my camera? (your branche on assembla haven't been updated for a while)

Quote from: ewavr on 05 / July / 2008, 12:06:48
propertycase #91 : digital zoom enabled(0=off, >0 =on)
No, it doesn't change, always 0.

Quote from: ewavr on 05 / July / 2008, 12:06:48
propertycase #95 : digital zoom value(0=minimal, 1,2...etc)
Yes, I confirm.
Logged
*

Offline PhyrePhoX

  • *****
  • 2254
  • make RAW not WAR
    • PhyreWorX
Re: A710 IS zoom during video recording - bugreport
« Reply #3 on: 05 / July / 2008, 20:25:10 »
wow, i'm impressed. you find features just by browsing ida pro? how did you find it? by comparing to digic II?
Logged
*

Offline fudgey

  • *****
  • 1705
  • a570is
Re: A710 IS zoom during video recording - bugreport
« Reply #4 on: 06 / July / 2008, 04:47:44 »
Quote from: ewavr on 05 / July / 2008, 12:06:48
I have question for Digic3 cameras users:
propertycase #91 : digital zoom enabled(0=off, >0 =on)
propertycase #95 : digital zoom value(0=minimal, 1,2...etc)

On a570is 1.00e both propcases work, but #91 is slightly different from your description:

#91 is always 0 unless I set digital zoom 1.5x (#91=2) or digital zoom 1.9x (#91=3) from the Canon menu. It's not "digital zoom enabled", it's "digital telephoto feature enabled". In this mode there is always some digital zoom, no matter what position the optical zoom is in. In these modes #95 is equal to #91, because that's what those two steps are numbered in the "Standard" mode.

The other options in that menu are Digital Zoom = "Off" or "Standard".

In "Standard" mode digital zoom kicks in when the user zooms past the optical zoom maximum 4x. At 4x optical (and below), #95 is 0. After that, it rises from 1 to 6 for digital+optical zoom settings of 4.7x, 6.0x, 7.7x, 9.6x, 12x, 16x respectively.

Writing to either one doesn't seem to have an effect (the propcase changes but camera operation doesn't).
Logged
*

Offline ewavr

  • ****
  • 1057
  • A710IS
Re: A710 IS zoom during video recording - bugreport
« Reply #5 on: 06 / July / 2008, 05:01:17 »
@ fudgey:
Thanks. One guy from russian forum tell me that for a650 propcase #94: 0 - digital zoom is "off" or "1.5x, 2x", 1- "standard"
#95 and #91 as you reported.

Now this fix in trunk (#433). Tested, as usually, only on A710.

Quote from: cyril42e on 05 / July / 2008, 20:22:32
Where can your private build be found, to see if I can port it to my camera? (your branche on assembla haven't been updated for a while)

http://trac.assembla.com/a710 - I use this build everyday in my camera. This build is only for A710 and GrAnd based. For me, Allbest build has too many unnecessary things (like MD, ISO override, games etc)  ;).
« Last Edit: 06 / July / 2008, 05:08:45 by ewavr »
Logged
*

Offline fudgey

  • *****
  • 1705
  • a570is
Re: A710 IS zoom during video recording - bugreport
« Reply #6 on: 06 / July / 2008, 05:25:43 »
Quote from: ewavr on 06 / July / 2008, 05:01:17
@ fudgey:
Thanks. One guy from russian forum tell me that for a650 propcase #94: 0 - digital zoom is "off" or "1.5x, 2x", 1- "standard"
#95 and #91 as you reported.

Oh how did I miss that :D.. yep, propcase #94 is 1 if Digital Zoom is "standard", 0 otherwise.
Logged
*

Offline cyril42e

  • ***
  • 111
  • SD1000/Ixus70 1.02a
    • CR-TEKnologies
Re: A710 IS zoom during video recording - bugreport
« Reply #7 on: 06 / July / 2008, 11:54:10 »
Quote from: fudgey on 06 / July / 2008, 04:47:44
#91 is always 0 unless I set digital zoom 1.5x (#91=2) or digital zoom 1.9x (#91=3) from the Canon menu. It's not "digital zoom enabled", it's "digital telephoto feature enabled".
Ooops, I misunderstood ewavr, yes I confirm it is the same on sd1000.

Quote from: ewavr on 06 / July / 2008, 05:01:17
One guy from russian forum tell me that for a650 propcase #94: 0 - digital zoom is "off" or "1.5x, 2x", 1- "standard"
#95 and #91 as you reported.
Confirm too.

Quote from: ewavr on 06 / July / 2008, 05:01:17
http://trac.assembla.com/a710 - I use this build everyday in my camera. This build is only for A710 and GrAnd based. For me, Allbest build has too many unnecessary things (like MD, ISO override, games etc)  ;).
Ok :). I saw that you commited the change for all cameras, thanks again!
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal