Frame Locked Mutliframe Stereo Photography - Script Writing - CHDK Forum
« previous next »
Pages: [1] 2   Go Down

Frame Locked Mutliframe Stereo Photography

  • 11 Replies
  • 8261 Views
*

Offline NN

  • *
  • 4
Frame Locked Mutliframe Stereo Photography
« on: 06 / February / 2013, 15:33:48 »
Advertisements
This is what I plan to do:

Taking stereo photography with the following conditions:
  • Multiple frames (As close to 30fps as possible)
  • Each consecutive frame must be synced between the two cameras

Is this possible?
What are my options?
My understanding is the most accurate method is the SDM USB voltage method?
(I found this link but is this my best option?: http://stereo.jpn.org/eng/sdm/pcb.htm)
What are my limitations?
What setup/cameras would be ideal? (Trying to keep price 500-1000 range if possible)

I am able to script if necessary but would prefer not to if the functionality already exists.
Thank you for you help.

Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Frame Locked Mutliframe Stereo Photography
« Reply #1 on: 06 / February / 2013, 15:40:55 »
    Quote from: NN on 06 / February / 2013, 15:33:48
    • Multiple frames (As close to 30fps as possible)
    • Each consecutive frame must be synced between the two cameras
    Is this possible?
    [/list]
    There is basically zero chance you will get 30 fps with a Canon P&S camera in normal picture taking mode.  So what you are looking for is sync'd video - something that has been talked about but so far not achieved.

    Quote
    My understanding is the most accurate method is the SDM USB voltage method?
    (I found this link but is this my best option?: http://stereo.jpn.org/eng/sdm/pcb.htm)
    CHDK and SDM share this method - CHDK information here :  http://chdk.wikia.com/wiki/USB_Remote



    Logged
    Ported :   A1200    SD940   G10    Powershot N    G16
    *

    Offline Microfunguy

    • ****
    • 4037
      • StereoData Maker
    Re: Frame Locked Mutliframe Stereo Photography
    « Reply #2 on: 07 / February / 2013, 05:52:32 »
    Quote from: NN on 06 / February / 2013, 15:33:48
    Is this possible?

    With the cameras that SDM and CHDK support ...  no.

    Quote
    What are my options?

    Very, very few.
    The GoPro Hero2 may be suitable although I am not aware of synch being tested.
    There are no plans for synch support with Hero3.
    Quote
    My understanding is the most accurate method is the SDM USB voltage method?

    That is only for still images.

    Quote
    What setup/cameras would be ideal? (Trying to keep price 500-1000 range if possible)

    What currency  .. Zambian dollars ?

    Quote
    would prefer not to if the functionality already exists.


    Inexpensive, synchronised movies using two separate cameras is an unsolved problem.

    I am currently building a rig that synchs two keychain cameras to 1/5000 sec.
    However, you probably want higher quality than that.


    David
    Logged
    *

    Offline NN

    • *
    • 4
    Re: Frame Locked Mutliframe Stereo Photography
    « Reply #3 on: 07 / February / 2013, 18:56:45 »
    Quote from: waterwingz on 06 / February / 2013, 15:40:55
    There is basically zero chance you will get 30 fps with a Canon P&S camera in normal picture taking mode.  So what you are looking for is sync'd video - something that has been talked about but so far not achieved.
    30 fps was an optimistic number. What would be the highest fps in normal picture more with sync?
    I am thinking the best option for continuous synced photos would be to modify the USB Remote by replacing the button with some sort of user controlled switch such as a timer or Arduino. Then I could slowly decrease the delay until sync is lost?

    Quote from: Microfunguy on 07 / February / 2013, 05:52:32
    What currency  .. Zambian dollars ?
    500-1000 USD (2597500 – 5195000 Zambian Kwacha)

    I am planning on using these cameras for a structured light scanner.
    Which route should I follow SDM or CHDK?
    Logged
    *

    Offline waterwingz

    • ******
    • 12140
      • Waterwingz
    Re: Frame Locked Mutliframe Stereo Photography
    « Reply #4 on: 07 / February / 2013, 19:06:17 »
    Quote from: NN on 07 / February / 2013, 18:56:45
    30 fps was an optimistic number. What would be the highest fps in normal picture more with sync?
    Currently, most Canon P&S cameras will only sustain about one shot every 2 seconds.  Using sync would slow that down a little bit.  Lapser has been working on getting rates up to a little less that 1 second per shot using the camera's continuous mode but you won't be able to sync that at all.

    Quote
    I am planning on using these cameras for a structured light scanner.  Which route should I follow SDM or CHDK?
    Try them both and see - the sync functionality is identical in both.    CHDK has a much more powerful scripting language - SDM goes on the assumption that you don't want or need to program and "dumbs things down" a lot for you.
    Logged
    Ported :   A1200    SD940   G10    Powershot N    G16
    *

    Offline Microfunguy

    • ****
    • 4037
      • StereoData Maker
    Re: Frame Locked Mutliframe Stereo Photography
    « Reply #5 on: 07 / February / 2013, 20:45:41 »
    Quote from: NN on 07 / February / 2013, 18:56:45
    What would be the highest fps in normal picture more with sync?

    We recently tested about two shots per second at reduced resolution with S95.

    However, this may be of interest :-

    http://www.kickstarter.com/projects/915328713/lynx-a-camera


    What resolution do you require ?


    Maybe the 1280x720 keychain cameras at 30 fps ARE suitable.
    « Last Edit: 07 / February / 2013, 20:49:47 by Microfunguy »
    Logged
    *

    Offline NN

    • *
    • 4
    Re: Frame Locked Mutliframe Stereo Photography
    « Reply #6 on: 07 / February / 2013, 21:00:42 »
    Quote from: Microfunguy on 07 / February / 2013, 20:45:41
    What resolution do you require ?

    I am looking to get at least 16MP.
    Also the cameras need to be farther spaced than that for my application.


    I have a few more questions:

    Is it possible to disable the refocus after every photo?
    This way I could focus once in the beginning an increase my overall capture rate.

    Has anyone tried to remove the capture button and trigger pictures my connecting the contacts that the button used to capture the picture? I'm curious to see if this is more or less accurate.

    SDM shows specific models that are compatible. Does this apply for CHDK?
    Branching off the previous question: What is the best model to buy right now in the P&S range?
    Logged
    *

    Offline philmoz

    • *****
    • 3450
      • Photos
    Re: Frame Locked Mutliframe Stereo Photography
    « Reply #7 on: 07 / February / 2013, 21:10:03 »
    Quote from: NN on 07 / February / 2013, 21:00:42
    Is it possible to disable the refocus after every photo?

    Yes.

    Quote
    This way I could focus once in the beginning an increase my overall capture rate.

    This will only increase the capture rate marginally. As posted earlier 1fps is about the best you can hope for. Some cameras may go up to 2fps; but probably not at 16MP.

    Quote
    Has anyone tried to remove the capture button and trigger pictures my connecting the contacts that the button used to capture the picture? I'm curious to see if this is more or less accurate.

    Since you can control the capture and triggering entirely in software the button and button contacts are irrelevant to capture speed.

    Quote
    Branching off the previous question: What is the best model to buy right now in the P&S range?

    The depends on your definition of best.

    The G1X has the best image quality; but is 14MP and very expensive in comparison to other models.
    The S95 is possibly one of the best for accurate synching between cameras; but is only 10MP. More recent models have additional delays that make accurate synch harder (although some progress has been made on this).

    Phil.
    Logged
    CHDK ports:
      sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
      g12 (1.00c, 1.00e, 1.00f & 1.00g)
      sx130is (1.01d & 1.01f)
      ixus310hs (1.00a & 1.01a)
      sx40hs (1.00d, 1.00g & 1.00i)
      g1x (1.00e, 1.00f & 1.00g)
      g5x (1.00c, 1.01a, 1.01b)
      g7x2 (1.01a, 1.01b, 1.10b)
    *

    Offline waterwingz

    • ******
    • 12140
      • Waterwingz
    Re: Frame Locked Mutliframe Stereo Photography
    « Reply #8 on: 07 / February / 2013, 21:11:05 »
    Quote from: NN on 07 / February / 2013, 21:00:42
    Is it possible to disable the refocus after every photo? This way I could focus once in the beginning an increase my overall capture rate.
    Set the AF lock manually using the built-in Canon functions or use CHDK's set_aflock() command.  I assume SDM has something similiar but its probably called "make_the_camera_only_focus_once" or something.  ;)

    However, getting your shot rate faster than even 1 per second already assumes you are doing this.

    Quote
    Has anyone tried to remove the capture button and trigger pictures my connecting the contacts that the button used to capture the picture? I'm curious to see if this is more or less accurate.
    As stated before,  I can guarantee that hard wiring the buttons will be far less precise than using the sync mode in CHDK or SDM

    Quote
    SDM shows specific models that are compatible. Does this apply for CHDK?
    Typically, SDM is a subset of the cameras supported by CHDK and they are usually the older models. The latest list of CHDK releases is here :  http://mighty-hoernsche.de/

    Quote
    Branching off the previous question: What is the best model to buy right now in the P&S range?
    A bit like asking what's the best car to buy.
    « Last Edit: 07 / February / 2013, 21:16:51 by waterwingz »
    Logged
    Ported :   A1200    SD940   G10    Powershot N    G16
    *

    Offline Microfunguy

    • ****
    • 4037
      • StereoData Maker
    Re: Frame Locked Mutliframe Stereo Photography
    « Reply #9 on: 08 / February / 2013, 06:08:09 »
    Quote from: NN on 07 / February / 2013, 21:00:42
    I am looking to get at least 16MP.


    So, ideally you want 30 fps AND 16MP resolution.
    There is no such movie resolution (or continuous-shooting speed) or camera.

    Quote
    SDM shows specific models that are compatible.

    There are many more cameras available for beta testing here :

    http://www.zenoshrdlu.com/assist/assist.html

    They include :-

    a490 100f
    a495 100f
    a800 100c
    a810 100b, 100d and 100e
    a1000 100a
    a3200 100a and 100d
    g12 100c, 100e and 100g
    ixus105 100b and 100c
    ixus750 100f, 100g and 100h
    s95 100h, 100i and 100k
    s100 100d, 100e, 101a and 101b
    sx20 102b and 102d
    sx130is 101c and 101f
    sx210is 100c
    sx230hs 101b

    Logged
    Pages: [1] 2   Go Up
    « previous next »
     

    Related Topics


    SimplePortal © 2008-2014, SimplePortal