My first post, so hope this is the correct place. I am not a computer nerd, or photo freak, so please respond if possible at a CHDK101 level.
Camera SX20IS Firmware 1.02B
Used Card Tricks to format, boot, and load small CHDK a 4GB Card.
Set card lock ON
Placed card in camera and turned on as per guide. Very quickly (about 1/2 second) displays red splash CHDK version and other info WITHOUT the CHDK Logo, then displays "no image".
I have verified that the Camera firmare version is correct, and the CHDK version is correct, and the card is locked. I have done this many times.
HOWEVER, PS.FIR and PS.FI2 are NOT in the download Are the PS.* files necessary?, if so where can they be downloaded. Although the missing PS.* files have been previously posted as issues with the SX20 my searches have not found a simple source or meaningful solution.
I am only trying to get up and running with CHDK at this stage as a stepping stone to learning, therefore if anyone can point me in the right direction I will be particularly greateful.
Thanks