Turn Off LCD Scripting - S95 Camera - Script Writing - CHDK Forum
« previous next »
Pages: [1] 2   Go Down

Turn Off LCD Scripting - S95 Camera

  • 12 Replies
  • 8133 Views
*

Offline Ivanovich

  • *
  • 5
Turn Off LCD Scripting - S95 Camera
« on: 02 / April / 2013, 12:18:18 »
Advertisements
The Question:
Can someone give me some good options as to what I can do to turn off the LCD display on my S95 when doing long time-lapse? I currently load a script called 'COUNTER.BAS' (2.7K) and it works great, it is just I'd really like to take longer sets of pictures and I think if the LCD if off after a few pictures, then that could work good. I know little of scripting but reading and learning.

Thanks for any help!

My Background:
Hi, I've had a S95 for a year and just found out about CHDK, so cool! I love time-lapse style photos/videos, but my batteries die much soon than I'd like. I've read a bunch of posts for time-lapse for the S95 and think turning off the monitor would really help. What I've noticed with many posts is that they don't always end with a success sorry and/or are several years old. Anyone have something fresh and conclusive?


Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Turn Off LCD Scripting - S95 Camera
« Reply #1 on: 02 / April / 2013, 12:28:06 »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Ivanovich

  • *
  • 5
Re: Turn Off LCD Scripting - S95 Camera
« Reply #2 on: 02 / April / 2013, 12:34:33 »
You really are a "Guru Member", that's EXACTLY what I was looking for, those links took me right to where I needed to go. Thanks!
Logged
*

Offline Ivanovich

  • *
  • 5
Re: Turn Off LCD Scripting - S95 Camera
« Reply #3 on: 02 / April / 2013, 13:04:58 »
Hi,

I loaded the script on to my s95 found here.....

http://chdk.wikia.com/wiki/Battery_Intervalometer

.... and called it battery.lua

It looked good on the screen, I could see all the options, but when I ran it, it reported

*** STARTED ***
:1: unexpected symbol near 'char(239)'
PRESS SHUTTER TO CLOSE

.......any idea what went wrong?
Logged
*

Offline Ivanovich

  • *
  • 5
Re: Turn Off LCD Scripting - S95 Camera
« Reply #4 on: 02 / April / 2013, 14:29:14 »
Hi - I figured it out myself. Was saving the code at UTF-8 instead of ANSI, so learning little by little....
Logged
*

Offline Ivanovich

  • *
  • 5
Re: Turn Off LCD Scripting - S95 Camera
« Reply #5 on: 02 / April / 2013, 14:37:37 »
Set for 'Turn Display Off' starts saying 'blanking display' but then says 'unable to blank the display'.
Any idea why this wont work?

Set for 'Turn Backlight Off' but I don't see any difference, what should I expect?
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Turn Off LCD Scripting - S95 Camera
« Reply #6 on: 02 / April / 2013, 15:09:39 »
Quote from: Ivanovich on 02 / April / 2013, 14:37:37
Set for 'Turn Display Off' starts saying 'blanking display' but then says 'unable to blank the display'.
Any idea why this wont work?
For the most part,  only Canon P&S cameras with an OVF (optical view finder) can actually have their display turned fully off.  The S95 does not have an OVF.

Quote
Set for 'Turn Backlight Off' but I don't see any difference, what should I expect?
The LCD backlight should turn off when the script runs.  Each time it takes a shot,  the backlight gets turned on again by the camera,  so that setting will make it turn off again.

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline srsa_4c

  • ******
  • 4451
Re: Turn Off LCD Scripting - S95 Camera
« Reply #7 on: 02 / April / 2013, 16:24:35 »
Quote from: waterwingz on 02 / April / 2013, 15:09:39
For the most part,  only Canon P&S cameras with an OVF (optical view finder) can actually have their display turned fully off.  The S95 does not have an OVF.
True, but it does have a shortcut button which can be set to put the camera into sleep.
The script could check for platform IDs which are known to have this feature ( get_buildinfo() ).
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Turn Off LCD Scripting - S95 Camera
« Reply #8 on: 02 / April / 2013, 16:38:34 »
Quote from: srsa_4c on 02 / April / 2013, 16:24:35
True, but it does have a shortcut button which can be set to put the camera into sleep.
I recall that discussion - http://chdk.setepontos.com/index.php?topic=9049.msg97241#msg97241

I don't think I asked how to get the camera out of sleep mode?  Press any button?

Quote from: srsa_4c on 02 / April / 2013, 16:24:35
The script could check for platform IDs which are known to have this feature ( get_buildinfo() ).
I assume somebody would first actually have to make a list of which cameras could do this.
« Last Edit: 02 / April / 2013, 16:40:17 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline srsa_4c

  • ******
  • 4451
Re: Turn Off LCD Scripting - S95 Camera
« Reply #9 on: 02 / April / 2013, 16:48:05 »
Quote from: waterwingz on 02 / April / 2013, 16:38:34
I don't think I asked how to get the camera out of sleep mode?  Press any button?
I think so. You could try it on your G10 (assuming it's one of those cameras).

Quote
I assume somebody would first actually have to make a list of which cameras could do this.
Or just press the shortcut button, it won't react anyway if the camera doesn't have one. Some cameras have similar functionality on their print button though...
Logged
Pages: [1] 2   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal