sx280hs chdk? - page 2 - CHDK Releases - CHDK Forum
« previous next »
Pages: 1 [2] 3   Go Down

sx280hs chdk?

  • 28 Replies
  • 20530 Views
*

Offline tzurek

  • *
  • 10
Re: sx280hs chdk?
« Reply #10 on: 23 / May / 2013, 08:38:09 »
Advertisements
I can't seem to get the bootdump script to work and I've tried both.

So I used the EOScard program to add the script string to the first sector
I added a file called script.req to the sd card and in it I wrote "for DC_scriptdisk" (without the quotes)
I also added a file called extend.m where I tried pasting the both scripts yet neither worked.

The first script recorded "not found!" (this showed up on the camera screen and a log file on the card)
The simple script did not result in a log file but the camera displayed "start not found!"

What am I doing wrong?
Logged
*

Offline srsa_4c

  • ******
  • 4451
Re: sx280hs chdk?
« Reply #11 on: 23 / May / 2013, 08:52:46 »
Quote from: tzurek on 23 / May / 2013, 08:38:09
The first script recorded "not found!" (this showed up on the camera screen and a log file on the card)
...
What am I doing wrong?
You're not doing anything wrong. The scripts are running.
Try using the first (bigger) script, with the following change:
Change 0xFF000004 to 0xF8000004, and 0xFF000000 to 0xF8000000.

update: the above modification may cause the camera to switch off. If it doesn't switch off, the dump will be 128MB.
Make the following change in addition to the above:
locate the following line:
romsize = 0xFFFFFFFC - startaddr
and change it to
romsize = 0xF8FFFFFC - startaddr
« Last Edit: 23 / May / 2013, 08:59:46 by srsa_4c »
Logged
*

Offline tzurek

  • *
  • 10
Re: sx280hs chdk?
« Reply #12 on: 23 / May / 2013, 09:02:51 »
I did the first change so the last If-Then statement is now:

   if memcmp(0xF8000004,"gaonisoy",8) = 0 then
      startaddr = 0xF8000000
      os = "dry"
      exit sub
   end if

However, I still got the same not found! message in the log.
I'll make the additional romsize adjustments now, for now.
Logged
*

Offline srsa_4c

  • ******
  • 4451
Re: sx280hs chdk?
« Reply #13 on: 23 / May / 2013, 09:07:21 »
Quote from: tzurek on 23 / May / 2013, 09:02:51
I did the first change so the last If-Then statement is now:

   if memcmp(0xF8000004,"gaonisoy",8) = 0 then
      startaddr = 0xF8000000
      os = "dry"
      exit sub
   end if

However, I still got the same not found! message in the log.
I'll make the additional romsize adjustments now, for now.
Hmmm. Looks like the ROM is either at an address we haven't seen before, or they changed the "gaonisoy" signature. I'll post a script that will try to dump 256MB in 16MB segments.
Logged
*

Offline srsa_4c

  • ******
  • 4451
Re: sx280hs chdk?
« Reply #14 on: 23 / May / 2013, 10:00:30 »
Script is below. It's a bit lame, and may cause the camera to switch off. It will try to dump memory (16MB) starting from 0xFF000000, then it will try the same from 0xFE000000, etc...
The argument of mydump() shows which memory segment is to be dumped.
Dump files will show up in the root of the SD card.
You can try to look at the dump files with a hex viewer, and zip up those which contain something other than 00 bytes (7zip recommended for compression).
Code: [Select]
dim f,a,startadr=0,romsize=0x1000000,msgstr=0

private sub mydump(c)
        startadr = c * 0x1000000
        startadr = startadr + 0xf0000000
        sprintf(msgstr,"A/DUMP%0X.BIN",c)
        LCDMsg_SetStr(a,msgstr)
        f=Fopen_Fut(msgstr,"w")
        Fwrite_Fut(startadr,romsize,1,f)
        Fclose_Fut(f)
end sub

private sub Initialize()
UI.CreatePublic()
a=LCDMsg_Create()
LCDMsg_SetStr(a,"Running")
System.Create()
msgstr = AllocateMemory(80)

        ' mydump(15)
        ' mydump(14)
        mydump(13)
        mydump(12)
        ' mydump(11)
        ' mydump(10)
        ' mydump(9)
        ' mydump(8)
        ' mydump(7)
        ' mydump(6)
        ' mydump(5)
        ' mydump(4)
        ' mydump(3)
        ' mydump(2)
        ' mydump(1)
        ' mydump(0)

        LCDMsg_SetStr(a,"Done")
FreeMemory(msgstr)
end sub
edit: commented parts of the code which appear to be unnecessary, changed chunk size to 16MB
« Last Edit: 26 / May / 2013, 07:57:38 by srsa_4c »
Logged
*

Offline tzurek

  • *
  • 10
Re: sx280hs chdk?
« Reply #15 on: 23 / May / 2013, 10:21:49 »
Thanks! It seems to have worked :)

1. I see that some files start with a lot of "AAAAAA" folowed by other repeating characters.
2. Others have multilines of ascii nonsense
3. Then there are others with lots of ascii lines but also lots of english.. stuff that looks like camera menu stuff I guess.

Which ones should I upload and make available? Just the ones with English (3), or all the ones that are not just one line of repeating characters (2 and 3)?

Update:
Actually, there's only 2 types, its either one line or multiline with English or other languages. 4 of the proper looking ones in all. I wil try upload them..
« Last Edit: 23 / May / 2013, 10:25:41 by tzurek »
Logged
*

Offline srsa_4c

  • ******
  • 4451
Re: sx280hs chdk?
« Reply #16 on: 23 / May / 2013, 10:32:25 »
Quote from: tzurek on 23 / May / 2013, 10:21:49
Thanks! It seems to have worked :)
Which ones should I upload and make available? Just the ones with English (3), or all the ones that are not just one line of repeating characters (2 and 3)?
If you have a compression utility that can create "solid" files (like 7zip), you could try to compress all dumps into one archive. If you don't, only post those dumps that make sense (dumps solely consisting of 'A' characters or so are probably not useful).
Logged
*

Offline tzurek

  • *
  • 10
Re: sx280hs chdk?
« Reply #17 on: 23 / May / 2013, 10:55:59 »
I have uploaded it to my Google Drive. All the useful files are 7zipped.
https://docs.google.com/file/d/0B4Y9UEEF5SVlT0lOczZ2S2hjUG8/edit?usp=sharing

I will put this up on the development forum :)
Logged
*

Offline mallir

  • *
  • 1
Re: sx280hs chdk?
« Reply #18 on: 08 / November / 2013, 11:15:22 »
Just wanted to see if any progress has been made on SX280HS, or if it is likely that there will be or not.

Thanks,

Rob
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: sx280hs chdk?
« Reply #19 on: 08 / November / 2013, 11:46:29 »
Quote from: mallir on 08 / November / 2013, 11:15:22
Just wanted to see if any progress has been made on SX280HS, or if it is likely that there will be or not.
link> CHDK FAQ : My camera isn't ported yet

and this :  http://chdk.setepontos.com/index.php?topic=10890.msg106970#msg106970

TL;DR : its a big job and nobody has started it
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
Pages: 1 [2] 3   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal