Ultimate Intervalometer - a script for shooting over a long duration - v4.9 - page 47 - Completed and Working Scripts - CHDK Forum

Ultimate Intervalometer - a script for shooting over a long duration - v4.9

  • 651 Replies
  • 243411 Views
Advertisements
I tried playkey on the A480 & S95 and they do stop functioning.
just fresh...but you wount think that:
Occured Time  2018:01:16 14:52:50
I retried, but the time seems to stay the same
If the time stamp on the ROMLOG does not change then you are most likely not seeing a crash and not what @Waechter is reporting. 

Unless you are using the exact setup he is seeing, it seems like you have a different problem. 

He also reported the PlayKey function working for other cameras so I'm suspecting this is camera model related.
Ported :   A1200    SD940   G10    Powershot N    G16

Small update :  reading back through this thread and the code, it seems calling the set_lcd_display( ) function when switching to playback mode caused crashing issues with some cameras.  I "fixed" it by inserting big sleep( ) statement and the actual root cause was not discovered.

I'll see what that tell us.

EDIT :  test script attached - switches to Playback without trying to turn off the LCD. Please test & report if that changes things?
« Last Edit: 22 / March / 2018, 07:06:08 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline Mlapse

  • *****
  • 584
  • S95 S110
could be different, but on bklite I do not have these issues.
then display goes dark, led on camera flashes (status led=0), shot is taken and display comes on.

So results look similar to waechter...the camera suddenly goes dead with lens open.
it is not bricked so i do not have to reload battery before it starts, I can start it again by pressing the on/off button.
it has just suddenly powered down after the display went dark


I've used the script without infinity or zoom(as you uploaded it)........the lens is closed while display was active(so this delay created an improvement, the script now moves the lens in correct position and ends up in play mode)..on the display you see last taken picture..it will not reopen. however it does not start again on the on/off button. it now powered down.

sorry uploaded the wrong romlog, hereby the correct one.

while testing I came across something else. on this camera autofocus is off, when I start the script AFL is displayed on the right hand side of the screen. if status led=1 AF light will flash before picture.
if status led is 0 only the led on the back is flashing.
(and with off none of the leds flash) When CHDK is running on the right upper corner it states opt:24 or 25 on startup, is that a temp reading? because it is definately not zoom.
« Last Edit: 22 / March / 2018, 05:22:13 by Mlapse »
frustration is a key ingredient in progress

Small update :  reading back through this thread and the code, it seems calling the set_lcd_display( ) function when switching to playback mode caused crashing issues with some cameras.  I "fixed" it by inserting big sleep( ) statement and the actual root cause was not discovered.

I'll see what that tell us.

EDIT :  test script attached - switches to Playback without trying to turn off the LCD. Please test & report if that changes things?

Yes, this prevents the camera from crashing, the lens retracts, the display stays on with the last taken picture and the script continues to work.  :)
Do you think this will only work if the display stays on?

could be different, but on bklite I do not have these issues.
then display goes dark, led on camera flashes (status led=0), shot is taken and display comes on.
bklite uses different code so what you see sounds normal - I assume the display goes back off after each shot?

Quote
So results look similar to waechter...the camera suddenly goes dead with lens open.it is not bricked so i do not have to reload battery before it starts, I can start it again by pressing the on/off button.
it has just suddenly powered down after the display went dark
In the CHDK Settings menu, do you have the Disable LCD Off option set to Always?
In the Canon menu, do you have the Lens Retract option set to 0 Sec ?

Quote
while testing I came across something else. on this camera autofocus is off, when I start the script AFL is displayed on the right hand side of the screen. if status led=1 AF light will flash before picture. if status led is 0 only the led on the back is flashing (and with off none of the leds flash)
Sounds normal to me - these things depend on how you setup the script parameters.

Quote
When CHDK is running on the right upper corner it states opt:24 or 25 on startup, is that a temp reading? because it is definately not zoom.
Nothing to do with the script - that's the reading from one of the camera's internal temperature sensors. See CHDK Manual : Show Temperature
Ported :   A1200    SD940   G10    Powershot N    G16

Yes, this prevents the camera from crashing, the lens retracts, the display stays on with the last taken picture and the script continues to work.  :)
Good news - that isolates the problem.

Quote
Do you think this will only work if the display stays on?
Now that I know what the problem is, there are some thing we can try.  Please test the attached version.
Ported :   A1200    SD940   G10    Powershot N    G16

--
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline Mlapse

  • *****
  • 584
  • S95 S110
Quote
bklite uses different code so what you see sounds normal - I assume the display goes back off after each shot?

yes

Quote
In the CHDK Settings menu, do you have the Disable LCD Off option set to Always?
In the Canon menu, do you have the Lens Retract option set to 0 Sec ?

disable lcd off is set at alt
canon menu ->lens retract is set at 1 min

...running new script now....after 3 pictures I checked settings and restarted script, it is on playkey, but have not seen lens retract

canon menu ->lens retract is set at 0 sec

lens is not retracted between shots

display stays on, only goes black during shot as intended

you improved something, the time in the log file is fixed now
« Last Edit: 22 / March / 2018, 07:46:47 by Mlapse »
frustration is a key ingredient in progress

lens is not retracted between shots
display stays on, only goes black during shot as intended
Watching the script loaded on my A1200 move the lens in & out between shots right now. Display off except while taking each shot.

Please enable logging and post the ULTIMATE.LOG file here as an attachment.
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline Mlapse

  • *****
  • 584
  • S95 S110
display went black between 1st and 2nd shot, after that it stays active

looking at an older ultimate.log where i know display off still worked I also only see one entry of set LCD off
« Last Edit: 22 / March / 2018, 09:41:37 by Mlapse »
frustration is a key ingredient in progress

 

Related Topics


SimplePortal © 2008-2014, SimplePortal