jan
You wrote that motion detection was supported. I tried with different scripts, but either the camera triggers by sensor noise or it doesn't trigger at all, depending on the values I've set up. Maybe it works with another script, so could you please tell us, which script you used?
Yes, i tried with the following script.
rem Author: MLuna - based om MX3 sample script
rem Tested on S3IS only
rem Requires Fingalo's build v 119
rem Use with caution!
@title Motion Detection
rem Shot without auto-focus/with auto-focus/continuously (need to put in continuous mode manually)
rem T implies test mode with MD cells drawing and no shots taken
@param a Shot (0=nf/1=f/2=c/3=t)
@default a 1
rem How long the shutter button will be pressed in continuous mode
@param b Continuos shoot (secs)
@default b 10
@param c Threshold (0-255)
@default c 5
@param d Compare Interval (msecs)
@default d 20
@param e Compare Interval (secs)
@default e 0
rem If this value is too small, the camera goes continuously shooting after the 1st shot.
rem Experiment with this value to find one fitted to your needs
@param f Begin Delay (secs)
@default f 5
@param g Pix step(speed/accuracy adj)
@default g 5
@param h Columns
@default h 6
@param i Rows
@default i 6
rem Frame width in which no MD is performed (in cell units)
@param j Dead frame
@default j 0
if a<0 then let a=0
if a>3 then let a=3
if c<0 then let c=0
if d<0 then let d=0
if e<0 then let e=0
if g<1 then let g=1
if h<1 then let h=1
if i<1 then let i=1
if j<0 then let j=0
rem Conversions secs to msecs
let b=b*1000
let e=e*1000
let f=f*1000
let d=d+e
rem This is the timeout in msecs. After this period, the motion trap is rearmed.
let T=600000
rem Parameters for the Dead Frame
let J=j+1
let H=h-j
let I=i-j
let t=0
print "press Shutter Button to Stop"
:repete
md_detect_motion h, i, 1, T, d, c, 1, t, 1, J, J, H, I, 0, g, f
if a=0 and t>0 then click "shoot_full"
if a=1 and t>0 then shoot
if a=2 and t>0 then goto "continuos"
if a=3 then goto "test"
let t=0
goto "repete"
:continuos
let X=get_tick_count
press "shoot_full"
:contloop
let U=get_tick_count
let V=(U-X)
if V<b then goto "contloop"
release "shoot_full"
goto "repete"
:test
if t>0 then print "Detected cells: ",t else print "No detection in 10 min!"
let t=0
goto "repete"
end
This script is from the topic:
https://chdk.setepontos.com/d/405
