got that. I press the power button on camera see 1.85 then resumes to viewfinder mode with blue STEREO Zoom on top in Blue. With CAMremote all connected I then plugin USB into camera and see screen go to my DVD display.
With NO <ALT> button #7 will focus the green square. Press again and it goes back to white/Focus off. When I press button #5 it focus then press #5 again and it shoots. Button #6 does the same as #5. Button #8 does nothing.
I then press Print button on back camera while its on and CAMremote-SDM <ALT> shows at bottom. Button #8, 7, 6, 5 does nothing. Servos still work on buttons 1-4.
Then I press shutter button on camera and middle left on camera screen shows CR: USB/CHDK+. Button #8 does nothing. pressing Button #7 shoots does focus with no green box and shoots. Screen shows... [SHOOT 1].
Button #6 and #5 does nothing..
After a while the camera like powers off with lens OUT and servos still work with controller but the only way to get camera back on is to push the power button on the camera and the lens goes in the it comes back out and it boots 1.85 with Stereo Zoom on top with NO <ALT> on.
