When I set up Bracketing in Continuous Mode with a TV Bracketing Value of 1 EV and a Bracketing Type of +/- then take pictures in continuous mode, it goes all screwy with the EV levels, resulting in the first picture usually taken fine but all the rest after are almost all white.
Quote from: frankgg on 13 / September / 2009, 17:48:30When I set up Bracketing in Continuous Mode with a TV Bracketing Value of 1 EV and a Bracketing Type of +/- then take pictures in continuous mode, it goes all screwy with the EV levels, resulting in the first picture usually taken fine but all the rest after are almost all white.Does ND filter override (to either state) help?
ND filter overrides (Off, Out, In) have no effect. Pattern is more or less as in frankgg's post. The first image is fine, but the "+" steps always seem to be way too high. The "-" steps might be okay. This is the case even when Tv bracketing is not set to +/- (AFAIR).
Quote from: IxusX3 on 01 / November / 2009, 06:02:37ND filter overrides (Off, Out, In) have no effect. Pattern is more or less as in frankgg's post. The first image is fine, but the "+" steps always seem to be way too high. The "-" steps might be okay. This is the case even when Tv bracketing is not set to +/- (AFAIR).Does ND filter override work (without bracketing)? Does Tv override work (without bracketing)?
Reported in http://chdk.setepontos.com/index.php?topic=10822.msg121686#msg121686 it appears there may be a case I've attached a CHDK 1.4 test build for firmware 100b that calls the hooked function. I think this should fix the issue.
Hallo reyalp,a short reply, your attachment works.The LUA script is running.
// replacement of sub_FF8423E4 for correct power-on. //(short press = playback mode, long press = record mode) *(int*)(0x2290)= (*(int*)0xC02200F8) & 1 ? 0x200000 : 0x100000; // & Your trick to prevent lens out after FW_update.
Ix970 has our wellknown little startup problem, it needs Code: [Select] // replacement of sub_FF8423E4 for correct power-on. //(short press = playback mode, long press = record mode) *(int*)(0x2290)= (*(int*)0xC02200F8) & 1 ? 0x200000 : 0x100000; // & Your trick to prevent lens out after FW_update.&& Even pure Canon wheel is strange. Seems a difference between wheel slow/fast or the first turn is ignored. wheel_ commands dont work.
void JogDial_CW(void){ _PostLogicalEventToUI(0x866, 2); // RotateJogDialRight}void JogDial_CCW(void){ _PostLogicalEventToUI(0x867, 2); // RotateJogDialLeft}
Started by Xenu General Help and Assistance on using CHDK stable releases
Started by Xenu AllBest's Builds
Started by nextbond Feature Requests
Started by jgdavidson AllBest's Builds
Started by Joz Firmware Dumping