I am trying to get chdkptp running on a Raspberry Pi 4 connected to a Cannon PowerShot Elph 180. I put CHDK on an SD card using the STICK tool, disabled the USB remote thing in the menu, plugged it in, and powered it on.
Bus 001 Device 005: ID 04a9:32c1 Canon, Inc. PowerShot ELPH 180 / IXUS 175
[1417978.009601] usb 1-1.3.4: new high-speed USB device number 5 using dwc_otg[1417978.141879] usb 1-1.3.4: New USB device found, idVendor=04a9, idProduct=32c1, bcdDevice= 0.02[1417978.141912] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3[1417978.141929] usb 1-1.3.4: Product: Canon Digital Camera[1417978.141944] usb 1-1.3.4: Manufacturer: Canon Inc....
pi@raspberrypi:~ $ lsusbBus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubBus 001 Device 004: ID 046d:c534 Logitech, Inc. Unifying ReceiverBus 001 Device 002: ID 2109:3431 VIA Labs, Inc. HubBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Jan 26 11:33:12 raspberrypi kernel: [78899.630307] usb 1-1.3: new high-speed USB device number 3 using xhci_hcdJan 26 11:33:13 raspberrypi kernel: [78900.180491] usb 1-1.3: device descriptor read/64, error -71Jan 26 11:33:13 raspberrypi kernel: [78900.620559] usb 1-1.3: device descriptor read/64, error -71Jan 26 11:33:13 raspberrypi kernel: [78900.840327] usb 1-1.3: new high-speed USB device number 5 using xhci_hcdJan 26 11:33:14 raspberrypi kernel: [78901.780951] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?Jan 26 11:33:14 raspberrypi kernel: [78901.781598] usb 1-1-port3: attempt power cycleJan 26 11:33:15 raspberrypi kernel: [78902.660347] usb 1-1.3: new high-speed USB device number 6 using xhci_hcdJan 26 11:33:15 raspberrypi kernel: [78902.660651] usb 1-1.3: Device not responding to setup address.Jan 26 11:33:15 raspberrypi kernel: [78902.880633] usb 1-1.3: Device not responding to setup address.Jan 26 11:33:15 raspberrypi kernel: [78903.100385] usb 1-1.3: device not accepting address 6, error -71Jan 26 11:33:16 raspberrypi kernel: [78904.010948] usb 1-1-port3: Cannot enable. Maybe the USB cable is bad?Jan 26 11:33:16 raspberrypi kernel: [78904.011590] usb 1-1-port3: unable to enumerate USB device
I see it says, "Maybe the USB cable is bad?" However, when I plug the camera into my laptop running Windows 10, it is able to connect without problem.
Started by murk General Discussion and Assistance
Started by nadavofi « 1 2 » General Help and Assistance on using CHDK stable releases
Started by Pravin Jat General Discussion and Assistance
Started by JvdP « 1 2 » General Discussion and Assistance
Started by repurposeresearch General Discussion and Assistance