The scene gets darker with the filter in. I tested a fairly dim scene where the camera automatically swings the filter out, but CHDK forces it in, making it too dark (=> it works)
A couple of days ago, when I was trying one of the older builds (don't remember which one now ) I could actually set the "aperture" to THREE different values, not two. F16, F8, and F2.7.I even used the F16 stop for a long exposure shot of traffic in the night with a 10 second shutter!Which would mean that there is something other than the ND filter at work in this camera?
The image was not made any darker with the filter "out", so it must not be working.
the effective aperture is narrower when you zoom the lens.
A camera error was detectedWill shut down automaticallyRestart cameraE41
You are correct - there are a number of ports where one firmware version matches another. Checking the stubs and maybe the three C task files should be all that is necessary to assure a match.
In this case the RAW buffer addresses looks OK; but the location of the active buffer is wrong.From looking at the firmware is should probably be 0x2E94 not 0x3F04 (see sub_FF884C18 in 1.00c firmware).
Quote from: waterwingz on 28 / November / 2011, 23:16:44You are correct - there are a number of ports where one firmware version matches another. Checking the stubs and maybe the three C task files should be all that is necessary to assure a match.I'm wondering if creating a separate 101d variant would make sense?Until now we only know that some 101d users are satisfied with 101c firmware.Should we stay with three variants (100c, 101a, 101c) and wait with creating 101d variant until 101d users report differences or problems we don't see on other variants? Or should we add 101d variant immediately to our platform that Autobuild server can create 101d builds as well?I would prefer to add the 101d variant to our platform to avoid confusion for 101d users.
How to find out correct values or verify existing Modemap table...
If one of y'all can point me to a fairly painless way to pull and dump this for y'all if you're interested, I'd be happy to do so.
Started by acseven General Discussion and Assistance
Started by ELPH300 « 1 2 » Hello, I'm a NEWBIE - HELP!! (Newbies assistance, User Guides and thank you notes)
Started by VincentD « 1 2 3 » General Help and Assistance on using CHDK stable releases
Started by yoshiharra General Help and Assistance on using CHDK stable releases
Started by igb General Help and Assistance on using CHDK stable releases