CHIMP - Canon Hack Installation and Management Platform - page 14 - General Discussion and Assistance

philmoz

3450

Re: CHIMP - Canon Hack Installation and Management Platform

« Reply #130 on: 31 / August / 2019, 19:42:32 »

Advertisements

Quote from: dmitrys on 31 / August / 2019, 07:57:10

g7x2 missing from camera_list.csv - remains unsolved
I added both g7x2 and sx280hs-102d manually

Please remove the G7X2.

If you had read the thread where you asked to add this to the camera list file you would know that this is not a working port.
It is a very very very early attempt to get DIGIC 7 working.

It does nothing but blink an LED and lock up the camera.

The code is in SVN for others to examine and maybe come up with ideas on how to proceed.
Right now DIGIC 7 support is at a dead end.

« Last Edit: 31 / August / 2019, 19:44:55 by philmoz »

Logged

CHDK ports:
sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
g12 (1.00c, 1.00e, 1.00f & 1.00g)
sx130is (1.01d & 1.01f)
ixus310hs (1.00a & 1.01a)
sx40hs (1.00d, 1.00g & 1.00i)
g1x (1.00e, 1.00f & 1.00g)
g5x (1.00c, 1.01a, 1.01b)
g7x2 (1.01a, 1.01b, 1.10b)

dmitrys

267

Re: CHIMP - Canon Hack Installation and Management Platform

« Reply #131 on: 01 / September / 2019, 05:47:50 »

Quote from: waterwingz on 31 / August / 2019, 10:12:08

The issue of not being able to use CHIMP for unofficial builds has come up several times in the last two years. Which is quite often given the fairly low volume of new users joining the project.

Yes, I am aware of this issue. Unfortunately, I'm not currently available to provide a major CHIMP update.

Logged

Author of CHIMP, Canon Hack Installation and Management Platform

dmitrys

267

Re: CHIMP - Canon Hack Installation and Management Platform

« Reply #132 on: 01 / September / 2019, 06:05:59 »

Quote from: philmoz on 31 / August / 2019, 19:42:32

Please remove the G7X2.

If you had read the thread where you asked to add this to the camera list file you would know that this is not a working port.
It is a very very very early attempt to get DIGIC 7 working.

It does nothing but blink an LED and lock up the camera.

The code is in SVN for others to examine and maybe come up with ideas on how to proceed.
Right now DIGIC 7 support is at a dead end.

I did read and understand the status of the G7 X Mark II port.

The addition of a camera to CHIMP only means that once it is supported by CHDK no change to CHIMP would be required.

Until then, the only difference from the user's perspective is the ability to proceed to the Action step. I attached two screenshots to demonstrate the two scenarios.

CHIMP-G7X2-Action.png (23.76 kB, 720x540 - viewed 123 times.)

CHIMP-G7X2-Unsupported.png (20.12 kB, 720x540 - viewed 98 times.)

Logged

Author of CHIMP, Canon Hack Installation and Management Platform

philmoz

3450

Re: CHIMP - Canon Hack Installation and Management Platform

« Reply #133 on: 01 / September / 2019, 16:46:42 »

Quote from: dmitrys on 01 / September / 2019, 06:05:59

The addition of a camera to CHIMP only means that once it is supported by CHDK no change to CHIMP would be required.

The source of truth for supported ports is the 'camera_list.csv' file, not the 'platform' directory structure.

If you use that, as other programs do, then your perceived problem goes away - new cameras will be available if / when they get added to the file.

Logged

CHDK ports:
sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
g12 (1.00c, 1.00e, 1.00f & 1.00g)
sx130is (1.01d & 1.01f)
ixus310hs (1.00a & 1.01a)
sx40hs (1.00d, 1.00g & 1.00i)
g1x (1.00e, 1.00f & 1.00g)
g5x (1.00c, 1.01a, 1.01b)
g7x2 (1.01a, 1.01b, 1.10b)

dmitrys

267

Re: CHIMP - Canon Hack Installation and Management Platform

« Reply #134 on: 09 / September / 2019, 13:54:23 »

I updated CHIMP to support all future revisions/versions of known cameras.

Please try the attached version and let me know if you encounter any problems.

Please note that this version requires .NET framework 4.6.1 (or later).

Edit 2019-10-16: Updated to beta.

CHIMP-0.9.6-BETA.zip (1660.73 kB - downloaded 157 times.)

« Last Edit: 16 / October / 2019, 12:22:35 by dmitrys »

Logged

Author of CHIMP, Canon Hack Installation and Management Platform

guthrie

7

Re: CHIMP - Canon Hack Installation and Management Platform

« Reply #135 on: 23 / December / 2020, 18:05:43 »

I don't know what further details there are for usage - but I start the program with the SD card in the computer (to install CHDK) and I get the error:
Detecting Card - Error, Value cannot be null, Parameter name Key

Logged