ELPH 110 HS (IXUS 125 HS) Porting Thread

nafraf

1308

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #210 on: 26 / September / 2014, 14:56:15 »

Advertisements

EVT support included in trunk 3623

Logged

fabri22

208

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #211 on: 26 / September / 2014, 16:46:17 »

Quote from: nafraf on 26 / September / 2014, 14:56:15

EVT support included in trunk 3623

WOW!
It also overrides the "slow motion movies" time limit.

Surely CHDK stands for Canon Hack Developers Kindness

PS
The overheating with EVT seems a false issue (i got 52°C CMOS max temperature after ~ 20 min full HD video
and 48°C CMOS max temperature after 1,5 hours "miniature enhanced" HD video) ... indoor test.

Logged

IXUS 125 HS (firm. 101a) - IXUS 115 HS (firm. 101c) - IXUS 117 HS (firm. 101a) IR-ized

thewer

2

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #212 on: 26 / November / 2014, 21:58:34 »

Hi everyone,

First of all - Thanks a lot for porting CHDK for this camera.

I am interested in buying a ELPH 110 HS and would like to know if the usb remote / multiple camera (sync) option is working with this build?

Also, if there are any firmware versions that are not compatible at the moment (to not buy them) - I couldn't find a list of officially released firmware versions for this camera unfortunately.

Thanks a lot for your help

-

Kind regards,
thewer

Logged

fabri22

208

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #213 on: 27 / November / 2014, 15:26:50 »

Quote from: thewer on 26 / November / 2014, 21:58:34

Hi everyone,

First of all - Thanks a lot for porting CHDK for this camera.

I am interested in buying a ELPH 110 HS and would like to know if the usb remote / multiple camera (sync) option is working with this build?

Also, if there are any firmware versions that are not compatible at the moment (to not buy them) - I couldn't find a list of officially released firmware versions for this camera unfortunately.

Thanks a lot for your help -

Kind regards,
thewer

- the USB remote works fine on my cam (CHDK 1.3)
- in this thread were not reported firmware versions other than 100d, 100e, 101a.

nice day

Logged

IXUS 125 HS (firm. 101a) - IXUS 115 HS (firm. 101c) - IXUS 117 HS (firm. 101a) IR-ized

thewer

2

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #214 on: 30 / November / 2014, 22:03:19 »

Hi there -

Thanks a lot for your help!

I'll try to get my hands on two ELPH 110 then (interested in stereo photography)

Kind regards,
thewer

Logged

reyalp

14082

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #215 on: 22 / October / 2016, 19:08:29 »

@Kasius Klej reported that live PTP view dimensions are incorrect for this port.

I've uploaded test builds for firmware 100d, 100e and 101a to https://app.box.com/s/rwco2rtn4otkesis5dohknkhtuq8ej8e

Please check that the everything visible on the camera display is also visible in the chdkptp live view, for both playback and record mode.

There are likely still problems if the camera aspect ratio is not set to 4:3, and possibly also when 16:9 video is being recorded. I can probably fix these someone can provide some information
1) The PROPCASE_ASPECT_RATIO value, =return get_prop(require'propcase'.ASPECT_RATIO) or for video, the VIDEO_RESOLUTION value.
2) An lvdump taken with the "quick dump" button in the debug tab in the live view area.

Logged

Don't forget what the H stands for.

Kasius Klej

30

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #216 on: 29 / October / 2016, 05:57:54 »

Quote from: reyalp on 22 / October / 2016, 19:08:29

Please check that the everything visible on the camera display is also visible in the chdkptp live view...

Quote from: reyalp on 22 / October / 2016, 19:08:29

There are likely still problems if the camera aspect ratio is not set to 4:3...

Everything is there in 4:3 aspect ratio. In 16:9 a short strip at the bottom is missing.

Logged

Kasius Klej

30

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #217 on: 29 / October / 2016, 06:09:28 »

Quote from: reyalp on 22 / October / 2016, 19:08:29

1) The PROPCASE_ASPECT_RATIO value, =return get_prop(require'propcase'.ASPECT_RATIO) or for video, the VIDEO_RESOLUTION value.

It says:

> =return get_prop(require'propcase'.ASPECT_RATIO)
187:return:1

Logged

reyalp

14082

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #218 on: 29 / October / 2016, 15:42:24 »

Quote

Everything is there in 4:3 aspect ratio. In 16:9 a short strip at the bottom is missing.

Thanks, I've checked this in, so the autobuilds after 4714 should be correct in 4:3 at least.

Quote from: Kasius Klej on 29 / October / 2016, 06:09:28

Quote from: reyalp on 22 / October / 2016, 19:08:29
1) The PROPCASE_ASPECT_RATIO value, =return get_prop(require'propcase'.ASPECT_RATIO) or for video, the VIDEO_RESOLUTION value.
It says:

> =return get_prop(require'propcase'.ASPECT_RATIO)
187:return:1

What I meant was the value in each different aspect ratio, like

0 = 4:3, 1 = 16:9, 2 = 3:2, 3 = 1:1

It will probably be the exact values listed above (unless some don't exist on this camera), but I'd like to confirm.

Same for =return get_prop(require'propcase'.VIDEO_RESOLUTION) in different video settings. I would expect

5=1920x1080, 4=1280x720, 2=640x480, 1=320x240

Again the camera may not support all of these, but the ones that exist should match.

Logged

Don't forget what the H stands for.

Kasius Klej

30

Re: ELPH 110 HS (IXUS 125 HS) Porting Thread

« Reply #219 on: 29 / October / 2016, 16:50:50 »

Quote from: reyalp on 29 / October / 2016, 15:42:24

Same for =return get_prop(require 'propcase'.VIDEO_RESOLUTION) in different video settings.

I get the same values for photos. For videos, my camera has 3 modes, and the get_prop returns 0 for all of them. I get
0=1920x1080, 0=1280x720, 0=640x480

« Last Edit: 29 / October / 2016, 16:57:03 by Kasius Klej »

Logged